Report first FabLab workshop

http://www.mediamatic.net/id/23652 2008-03-06T12:27:37+01:00 Report first FabLab workshop 12 September 2007

What exactly is a FabLab? Ask anyone who has used or visited one and you will get a different answer. Described by one of its NL founders Dirk van Vreeswijk as “the next step in Do-it-yourself… it’s a fabrication playground” a place to realize your 3d and 2d designs in new ways.

On September 12th Mediamatic and FabLab NL hosted a workshop for artists and designers to do just that. Among the exciting machines were a 3D milling machine, vinyl (sticker) cutter, Dye sublimation printer and one very popular laser cutter. Projects including stencils, stamps leaves engraved with text, images on wood, text on cloth and acrylic, and a prototype for a lamp with text were created. The full day workshop kicked off with inspiring lectures and slide shows from artist/designer (yes you can be both) <a href="http://www.mediamatic.net/person-19919-en.html">Mirthe Blussé</a> and architect <a href="http://www.mediamatic.net/person-10505-en.html">Rein Jansma</a>. Mirthe Blussé discussed the use of typography on and off the street as well as the use of type in creative design concepts. <a href="http://www.mediamatic.net/222201/en/pop-up"> <img src="http://fast.mediamatic.nl/f/sjnh/image/127/23637-400-267.jpg" height="267" width="400" alt="" title="Fablab 2" playable="1"/> </a><a title="Click to get a larger image - Fablab 2 - Mediamatic.net" href="/23637/en/fablab-2">Fablab 2</a> Rein Jansma Rein brought samples with him to the workshop saying in the two weeks his office has had a laser cutter similar to the FabLab’s it has been cutting around the clock. Combined with 3D modeling software it allows the architect to cut 2D shapes that can be assemble in layers to make precise prototypes quickly. Some workshop participants came with designs complete ready to be rendered while others after hearing what was possible created new projects during the brainstorming session. Though all machines were explained if not demoed during the workshop most attendees seemed most intrigued by the Epilog. <a href="http://www.mediamatic.net/222201/en/pop-up"> <img src="http://fast.mediamatic.nl/f/sjnh/image/894/23638-400-267.jpg" height="267" width="400" alt="" title="Fablab 3" playable="1"/> </a><a title="Click to get a larger image - Fablab 3 - Mediamatic.net" href="/23638/en/fablab-3">Fablab 3</a> Laser tests on press board, plastic and tissue paper Following an overview of the machine participants were able to try out their prototypes by uploading a bitmap image or vector drawing to a FabLab computer. Adjustments were made in Coral Draw and then the job was then sent to the laser cutter. <a href="http://www.mediamatic.net/222201/en/pop-up"> <img src="http://fast.mediamatic.nl/f/sjnh/image/573/23639-400-267.jpg" height="267" width="400" alt="" title="Fablab 4" playable="1"/> </a><a title="Click to get a larger image - Fablab 4 - Mediamatic.net" href="/23639/en/fablab-4">Fablab 4</a> Intro to lab and machine line-up Basically anything that's flat and fits inside the machine can be cut or etched… you name it someone has probably at least thought of lasering it. Material containing pvc cannot be lasered because it releases toxic fumes when burned. And though really you shouldn’t look directly at the laser it is difficult to NOT watch your own 2d designs come to life in front of you eyes. <a href="http://www.mediamatic.net/222201/en/pop-up"> <img src="http://fast.mediamatic.nl/f/sjnh/image/095/23640-400-267.jpg" height="267" width="400" alt="" title="Fablab 5" playable="1"/> </a><a title="Click to get a larger image - Fablab 5 - Mediamatic.net" href="/23640/en/fablab-5">Fablab 5</a> Watching the Epilog – it’s like magic Ahhhh…. the smell of burning rubber and the roar of the generator. Spend any amount of time with the laser cutter and you will appreciate the speed and accuracy at which it can perform tasks that would take hours to produce (if at all) by hand. <a href="http://www.mediamatic.net/222201/en/pop-up"> <img src="http://fast.mediamatic.nl/f/sjnh/image/933/23646-400-267.jpg" height="267" width="400" alt="" title="Fablab 12" playable="1"/> </a><a title="Click to get a larger image - Fablab 12 - Mediamatic.net" href="/23646/en/fablab-12">Fablab 12</a> Luminous green lasered leaf – Theun Karelse <a href="http://www.mediamatic.net/222201/en/pop-up"> <img src="http://fast.mediamatic.nl/f/sjnh/image/822/23647-267-400.jpg" height="400" width="267" alt="" title="Fablab 13" playable="1"/> </a><a title="Click to get a larger image - Fablab 13 - Mediamatic.net" href="/23647/en/fablab-13">Fablab 13</a> Typografie lamp prototype – Cher van Tol <a href="http://www.mediamatic.net/222201/en/pop-up"> <img src="http://fast.mediamatic.nl/f/sjnh/image/844/23649-400-267.jpg" height="267" width="400" alt="" title="Fablab 14" playable="1"/> </a><a title="Click to get a larger image - Fablab 14 - Mediamatic.net" href="/23649/en/fablab-14">Fablab 14</a> Acrylic text – Ringo Mollinger <a href="http://www.mediamatic.net/222201/en/pop-up"> <img src="http://fast.mediamatic.nl/f/sjnh/image/577/23650-400-267.jpg" height="267" width="400" alt="" title="Fablab 15" playable="1"/> </a><a title="Click to get a larger image - Fablab 15 - Mediamatic.net" href="/23650/en/fablab-15">Fablab 15</a> Bitmap on wood – Jessica Gellweiler Jessica Gellweiler http://www.mediamatic.net/id/21942 ARTICLE review 1