Bodies of Change Installation Process

Building the installation

This is the first in a series of articles tracking the construction process and growth of the Bodies of Change installation.

Vergroot

Result of the Bodies of Change process - the mushroom spores are steadily spreading through the art piece. Invasive mold has also shown up to claim its part of the nutritious substrate. This art piece is part of the Paddestoelen Paradijs exhibition. Part of the Bodies of Change artwork at Paddestoelen Paradijs. Govert de Jong

On the 5th of December 2011 we began building the Bodies of Change installation by Maurizio Montalti. Since this is a living and growing installation, the initial building process is crucial to the growth of the piece. The installation consists of a felt shroud inoculated with fungal mycelia from the species Schizophyllum Commune. The goal is for the fungi to grow on the shroud, replicating the processes of growth and decomposition that can take place under the ground.

The Structure

The first phase of building was the construction of the box in which the 'body' was encased. The box is a stainless steel structure with plexiglass on the top (in order to take clearer time-lapse pictures through) and PVC plastic wrapped around for the walls. The PVC helps to keep out any contaminants from the outside air and seals moisture and humidity inside the box to help the mycelium grow.

Sterilization

Installing Bodies of Change Part 1

In order to minimize any chance of contamination, which would slow down the growth of or even kill the mushrooms, all the materials to be used needed to be sterilized. As you can see in the video below, this was done by placing the materials we were using (the grains and the cotton) in aluminum foil wrapped glass jars and boiling them in a pressure cooker for 45 minutes.

Vergroot

Sterilized materials - These are the sterilized materials for the Bodies of Change installation. This installation is part of the Paddestoelen Paradijs exhibition. Govert de Jong, Anna Meijer

The Clean Room

Installing Bodies of Change Part 2

Once all the materials had been sterilized, we carried the sealed jars into the clean room in order to open them and cool down the materials. It is important to cool down the materials in the clean room before bringing them back out into the 'dirtier' air, because warm materials have a higher chance of getting contamination. Once the materials had cooled down, we were able to begin working on the installation.

Inoculation

Installing Bodies of Change Part 3

With all the materials ready, we were able to begin the inoculation of the shroud with the mushroom spores. First, we laid down wet cotton all over the structural framework of the 'body'. The wet cotton works to increase the humidity and moisture level inside the box once it is sealed. Then we spread the grains all over the body. The grains act as 'food' for the mushrooms, so that they can keep growing over a longer period of time. Maurizio had a mixture of the grains that had the mycelium grown into them and he also spread them onto the body. Next, we put the shroud over top of the 'body' and sprayed a mixture of nutrients and antibiotics all over it. This mixture helps in assisting the growth of the mushrooms and keeping away bad bacteria. The final step was spraying the body with the mushroom spores that had been broken down into the nutrient mixture. These spores were grown in the lab by Maurizio.

Finally, we sealed the body inside the box with the PVC. We will be tracking and visually documenting the growth of fungus over time by using a camera mounted on the ceiling over the 'body', which will capture time lapse images.

You can read more about the artwork and the concept behind it here.